Description
The complete assembly ready to install on your machine as either Top or Bottom guides.
This assembly is suitable for running any blade width up to approx 27mm carbide tipped band that is common these days.
Supplied with either 3/4″ dia (19.05mm) OR a 20.00mm dia mounting rod to suit your machine. Rod will be supplied at any length required so when ordering please advise. We can always send it out a tad longer than needed, better than a tad shorter we find…
To help you work out how these guides retro fit to your machine:
When viewed directly from the front – The blade line on your machine needs to run 25mm or 1″ either side of center line of the thrust wheel which is also center line of the mounting rod. The guide assemble can be installed either way up, so the blade line will be either left or right of mounting rod.
The backing plate is 98mm high x 74mm wide and the rod is centered top to bottom.
Sometimes an adapter block will have to be made up to mate your machine to new guides to gain the correct side to side offset. This could be around $150-350 AUD extra. More for custom bracket requiring built in sideways adjustment with a sliding block.
Guides supplied with a simple 4 page install guide, and general bandsaw tips. Either emailed or hard copy will be sent.